PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Self-production |
대한민국 |
$6.74 |
$38.00 |
P00000NW |
Select item with details above |
Name | Quantity | Price |
---|---|---|
Working Toy Diro |
6.74 ( 38.00) |
Discounted amount of your subtotal will appear when you place your orders.
Material
EVA, steel, plastic, nylon, silicone
Components
paper drawing, EVA parts, snap bolts / nuts, pin bolts / nuts, center of gravity bar,
center of gravity bolt, washer, silicone, dinosaur Eyes, nylon string, weight Nut
You can study the center of gravity as you create a walking toy and understand the movement, balance and center of gravity.
1 Step. Body assembly order
① Fold the ring clasps as shown in the photo.
② Fold the body along the fold line.
③ Insert the ring clasps into the groove of the body as shown in the figure and assemble it.
④ Put a pin bolt(long) on the EVA dinosaur hand.
⑤Insert the assembled arm into the body, fit the other arm on the opposite side and fix it with pin nut.
*Press the pin nut firmly by hand.
⑥ Insert a small EVA circle into the center of gravity bar (short).
*Check the length of the rod and the size of the EVA circle.
⑦ Insert the center of gravity rod into the bottom of the dinosaur body.
⑧ Insert the EVA small circle into the opposite center of gravity rod and secure it with the center of gravity bolt.
⑨ Put in six EVA horns into the grooves on the back of the dinosaur.
2 Step. Head assembly order
① Fold the head along the fold line.
② Insert the locking hook into the groove.
③ Align the holes in the head and neck.
④ Insert a large EVA circle into the short pin bolt.
⑤ Insert the pin bolt into the aligned head hole, and insert the EVA large circle on the opposite side and fix it with pin nut.
⑥ Attach dinosaur eyes to both sides of the head.
3 Step. Legs, feet assembly order
① Fold and assemble the legs according to the folding line.
② Insert the center of gravity bar (long) into the hole of the leg and rotate it.
*Check if the legs rotate by themselves.
③ Fold the dinosaur foot along the fold line.
④ Place the silicone on the inside of your foot and insert the snap bolt.
*Check the silicon orientation.
⑤ Secure it to the snap bolt with a snap nut. Press the hand in to secure the snap nut.
⑥ Fold the toenails into a lozenge.
⑦ Put claws on the assembled feet.
⑧ Secure legs and feet with snap bolts and nuts.
*Assemble while checking the position of the dinosaur foot.
⑨The bottom of the finished legs and feet & The finished leg look.
⑩ Insert the center of gravity rod (long) into the two legs and the body.
⑪ Secure the center of gravity bolt to the center of gravity rod.
⑫ Completed Walking Toy.
4 Step. Make a weight
① Fold the weight clasp in half.
② Tie a string into the small hole of the weight clasp.
③ Tie the other end of the string to the loop hole.
④ Insert three weight washers into the weight nut. Fit the nut to the weight clasp and secure with snap bolt.
5 Step. Let's run the Dinosaur Dilo
① Hang the hook on the body.
② Hang the weight on the end of the table.
③ Tighten the strings, push the dinosaur's body sideways, and let go.
There are no posts to show
There are no posts to show